SERIES 6LHP
The high-pressure transducers of the 6LHP series have a robust housing made of stainless steel, giving them optimum long-term stability for a range of OEM applications. The metal diaphragm is welded on front-flush and gap-free, separating off the piezoresistive pressure sensor, which is made of silicon, from the measuring medium. Every pressure transducer is measured over the entire pressure and temperature profile and is supplied with a detailed calibration sheet.
- High long-term stability
- Robust housing made from stainless steel, Hastelloy or Inconel
- Front-flush diaphragm welded with no gaps
- High operating temperature up to 150 °C
- Optimised thermal behaviour
| Pressure Ranges: | 0…100 to 0…2000 bar |
| Accuracy: | ± 0,5 %FS |
| Long Term Stability: | ± 0,25 %FS |
| Dimensions: | ⌀ 13 mm x 8 mm |
| Temperature Range: | -40…150 °C |
| Material: | Steel 1.4435, Hastelloy C-276, Inconel 718 |
- Insulated piezoresistive pressure sensor encapsulated in an oil-filled metal housing
- Ideal for mounting with O-ring and support ring
- Typical range of output signal of 160 mV/mA
- Oil and gas
- Oceanology
- Geology
- Energy sector
- Hydraulics