SERIES 9FL
The pressure transducers of the 9FL series have a compact, robust housing made of stainless steel, giving them outstanding long-term stability for a range of OEM applications. The metal diaphragm is welded on front-flush and gap-free, separating off the piezoresistive pressure sensor, which is made of silicon, from the measuring medium. The additional flange on the housing means that it can be welded to another housing, or an axial seal can be used. Every pressure transducer is measured over the entire pressure and temperature profile and is supplied with a detailed calibration sheet.
- Very high long-term stability
- Robust, compact stainless-steel housing with flange
- Front-flush, crevice-free welded diaphragm
- Varied installation options
- Very high proof pressure
- Optimised thermal behaviour
| Pressure Ranges: | 0…0,2 to 0…200 bar |
| Accuracy: | ± 0,25 %FS |
| Long Term Stability: | ± 0,2 %FS |
| Dimensions: | ⌀ 17 mm x 5,5 mm |
| Temperature Range: | -40…125 °C |
- Insulated piezoresistive pressure sensor encapsulated in an oil-filled metal housing
- Housing with flange for direct welding or axial seal using an O-ring
- Typical range of output signal of 160 mV/mA
- OEM
- Heating pumps
- Autoclaves
- Meteorology